---
title: 300 dpi and Image Resolution, Explained
url: https://carmichaelprinting.com/guides/300-dpi-resolution-explained/
business: Carmichael Printing Company, Inc.
what: commercial printing, copying, graphic design and prepress, binding and finishing, mailing and fulfillment
phone: (916) 487-8679
email: service@carmichaelprinting.com
address: 5757 Robertson Avenue, Suite B, Carmichael, CA 95608 (one block off Fair Oaks Blvd)
hours: Mon-Fri 9:00 am - 4:30 pm, Sat-Sun closed
since: 1965
quotes: most within one business day
---

- [Home](https://carmichaelprinting.com/)
- [Guides](https://carmichaelprinting.com/guides/)
- 300 dpi and image resolution, explained

5 min read - updated November 2026

# 300 dpi and image resolution, explained

For print, an image should have about 300 pixels per inch at the size it will be printed, so a 4 by 5 inch photo needs roughly 1200 by 1500 pixels. Web images are made for 72 pixels per inch screens and usually look jagged and soft when printed at full size.

Key points

- Target 300 ppi at the final print size
- Pixels needed = inches x 300
- Screens show about 72 ppi, which is too low for print
- Enlarging a small image in software does not add detail
- TIF and EPS are preferred image formats for printing

Resolution is the most common reason a good-looking picture prints badly. On a screen you see a small version of the picture, and the eye forgives it. A printed page is held close and shows every missing pixel. The fix is arithmetic you can do in your head.

## How many pixels do I need?

Multiply the printed width and height in inches by 300. A 4 x 5 inch photo printed at full size needs about 1200 x 1500 pixels, because 4 inches x 300 = 1200 and 5 inches x 300 = 1500. A full 8.5 x 11 inch page picture needs about 2550 x 3300 pixels.

How many pixels do I need? Printed size Pixels at 300 ppi

3.5 x 2 in 1050 x 600

4 x 6 in 1200 x 1800

5 x 7 in 1500 x 2100

8.5 x 11 in 2550 x 3300

## dpi or ppi: what is the difference?

Pixels per inch (ppi) describes an image file when its print size is known. Dots per inch (dpi) is the output resolution of a printer. People use them interchangeably, and print shops usually say 300 dpi when they mean 300 ppi in the file.

Printer dpi can be much higher than the image ppi, because a printer lays down tiny dots of ink to build each image pixel. Do not try to match them. Match the ppi to the print size.

## Why web images do not print well

Most monitors show about 72 pixels per inch, and web graphics are made for that. A picture that fills your screen at 72 ppi has only about a quarter of the pixels per inch needed for print, and printing a web page or logo shows jagged diagonal lines called stair-stepping. GIF, JPG and BMP files made for the web are generally too low in resolution for printing.

A digital camera photo in JPG format can work, depending on the resolution setting it was taken at. Phone and camera originals are usually large enough; the copy that was emailed, posted or screenshotted is usually not.

## How to check a file

- Open the image properties and note the width and height in pixels.
- Divide each number by the size in inches where it will print.
- If the answer is near 300 or higher, the image is fine.
- If it is much lower, find the original or a larger copy.
- Do not simply raise the ppi number in the software; the pixels stay the same.

## Text and logos in image files

Text saved inside a raster image, especially type smaller than ten points, can print pixelated. Create it in a layout or illustration program as vector text, made of lines and fills rather than pixels, so it stays sharp at any size. If the only copy of your logo is a small JPG, send it with the job and we can talk through options, including rebuilding the logo with our in-house design.

## When a low-resolution image is all you have

Sometimes the only copy of a photo is small, and that is a real limit. Printing it smaller than planned raises its effective ppi, so a picture that is too small for a half page may look fine as a small box on a page. Ask for the original from whoever took the photo, and tell us what you have so we can suggest a size that holds up.

### Sources (3)

- Wikipedia : [en.wikipedia.org/wiki/Pixel_density](https://en.wikipedia.org/wiki/Pixel_density) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Dots_per_inch](https://en.wikipedia.org/wiki/Dots_per_inch) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Prepress](https://en.wikipedia.org/wiki/Prepress) (checked November 2026)

## Ready when you are

Send the file, a sample to match, or just the details. Most quotes within one business day.

[Get a quote](#quote)[Send a file](https://carmichaelprinting.com/send-a-file/)

## Keep reading

- [Print-ready file checklist](https://carmichaelprinting.com/guides/file-prep-checklist-for-print/)
- [PDF export settings for print](https://carmichaelprinting.com/guides/pdf-export-settings-for-print/)
- [CMYK vs RGB: why colors shift in print](https://carmichaelprinting.com/guides/cmyk-vs-rgb/)
- [Logo design](https://carmichaelprinting.com/services/logo-design/)

Questions

## Questions we hear

[All questions](https://carmichaelprinting.com/faq/)

### Is 150 dpi good enough?

It can be acceptable for a photo viewed from a distance, but 300 ppi is the recommended standard for printing at normal reading distance.

### Does more than 300 ppi help?

Not much. Beyond about 300 ppi the file grows larger without a visible gain on most printed work.

### Which image formats work best?

TIF and EPS work best for commercial printing, and we accept virtually any image type; the main issue is always resolution.
