---
title: Brochure Folds: Tri-Fold vs Z-Fold and More
url: https://carmichaelprinting.com/guides/brochure-folds-tri-fold-vs-z-fold/
business: Carmichael Printing Company, Inc.
what: commercial printing, copying, graphic design and prepress, binding and finishing, mailing and fulfillment
phone: (916) 487-8679
email: service@carmichaelprinting.com
address: 5757 Robertson Avenue, Suite A, Carmichael, CA 95608 (one block off Fair Oaks Blvd)
hours: Mon-Fri 8:00 am - 5:00 pm, Sat-Sun closed
since: 1965
quotes: most within one business day
---

- [Home](https://carmichaelprinting.com/)
- [Guides](https://carmichaelprinting.com/guides/)
- Brochure folds: tri-fold vs Z-fold and more

6 min read - updated November 2026

# Brochure folds: tri-fold vs Z-fold and more

A tri-fold folds a sheet into thirds to make six panels with one panel tucked inside, and a Z-fold zigzags the panels back and forth like an accordion, so it opens flat in one view. A half-fold, or bi-fold, folds the sheet once to make four panels.

Key points

- Bi-fold: one fold, four panels
- Tri-fold: folded in thirds, six panels
- Z-fold: accordion style, six panels that open flat
- The inside flap of a tri-fold is slightly narrower
- Folding varies by about plus or minus 1/16 inch

The fold decides how a reader moves through a brochure. One fold shows a cover and an inside spread, while three panels reveal one at a time. Choosing the fold before you design saves a lot of rework, because each fold needs its panels planned differently.

## The common folds compared

Wikipedia describes the bi-fold as one fold making four panels, the tri-fold as folded into thirds for six panels, and the Z-fold as an accordion where panels fold back and forth.

The common folds compared Fold Panels How it opens Good for

Bi-fold (half) 4 Like a book Programs, menus, simple brochures

Tri-fold (letter or C-fold) 6 Flap opens, then the spread Service brochures, mailers

Z-fold (accordion) 6 Zigzag, opens all at once Step-by-step content, maps

## Panel sizes for a letter-size tri-fold

A letter sheet turned sideways is 11 inches wide, and divided in three the panels would each be about 3.67 inches. In practice, the panel that folds inside is made a little narrower than the others so it tucks without bulging. A common setup makes the tucked panel about 1/16 to 1/8 inch narrower, for example 3 11/16, 3 11/16 and 3 5/8 inches across a letter sheet. Ask us for the widths for your fold, and set your guides before placing text.

## Planning the content

- Tri-fold: the front panel is the cover, the inside flap is what the reader sees first when opening, so put the hook there
- Z-fold: every panel is seen in sequence, so number steps or tell a story left to right
- Bi-fold: the inside spread is one big area for a photo or a map
- Put the contact panel where it does not get hidden when displayed in a rack

## Folding and ink

Paper is made of fiber, so ink can crack along a fold. This is unavoidable, so avoid heavy solid ink right on the fold line, and keep text and faces away from it. The folding machine can vary by plus or minus 1/16 inch, so do not run a thin line or border along the crease. See [folding](https://carmichaelprinting.com/services/folding/) and [scoring](https://carmichaelprinting.com/services/scoring/), which helps heavier paper fold cleanly.

## Mailing a folded piece

A folded brochure that is mailed needs to meet mailpiece size limits, and a letter-size sheet folded in thirds is small enough to fit many mailing formats. Check the rules in [letter vs flat mail sizes](https://carmichaelprinting.com/guides/letter-vs-flat-mail-sizes/) before you finalize.

## Other folds you may see

A gate fold has two outer panels that fold in to meet at the center, like a pair of doors, and it makes a dramatic opening for a menu or an invitation. A roll fold, also called a letter fold with extra panels, tucks each panel inside the next. A double parallel fold produces eight panels from one sheet.

Each of these needs its own layout, and the more folds there are, the more precisely panel widths matter. Show us a sample of the fold you like, or describe the opening you want, and we will tell you how it can be made.

## Choosing between tri-fold and Z-fold

If the story has a cover and an inside surprise, choose the tri-fold. If it is a sequence, like steps or a timeline, choose the Z-fold, because the reader sees it laid out in one view. When in doubt, sketch both on scrap paper and see which reads better.

## Checking a folded dummy

Before you finalize, print the layout on plain paper, fold it, and look at it as a reader would. The order of panels, and what shows when the brochure is first opened, are far easier to judge in your hands than on a screen.

### Sources (2)

- Wikipedia : [en.wikipedia.org/wiki/Brochure](https://en.wikipedia.org/wiki/Brochure) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Paper_size](https://en.wikipedia.org/wiki/Paper_size) (checked November 2026)

## Ready when you are

Send the file, a sample to match, or just the details. Most quotes within one business day.

[Get a quote](#quote)[Send a file](https://carmichaelprinting.com/send-a-file/)

## Keep reading

- [Brochures](https://carmichaelprinting.com/products/brochures/)
- [Folding](https://carmichaelprinting.com/services/folding/)
- [Scoring](https://carmichaelprinting.com/services/scoring/)
- [Flyer, brochure or postcard?](https://carmichaelprinting.com/guides/flyer-vs-brochure-vs-postcard/)

Questions

## Questions we hear

[All questions](https://carmichaelprinting.com/faq/)

### Which fold is the most common?

The tri-fold on a letter-size sheet is the classic brochure format.

### Does a Z-fold need different artwork?

Yes. Panels are read in sequence and the fold lines fall in different places, so lay out the six panels before you design.

### Can you fold for me?

Yes. Folding is one of Carmichael Printing's bindery services.
