---
title: CMYK vs RGB: Why Colors Shift in Print
url: https://carmichaelprinting.com/guides/cmyk-vs-rgb/
business: Carmichael Printing Company, Inc.
what: commercial printing, copying, graphic design and prepress, binding and finishing, mailing and fulfillment
phone: (916) 487-8679
email: service@carmichaelprinting.com
address: 5757 Robertson Avenue, Suite B, Carmichael, CA 95608 (one block off Fair Oaks Blvd)
hours: Mon-Fri 9:00 am - 4:30 pm, Sat-Sun closed
since: 1965
quotes: most within one business day
---

- [Home](https://carmichaelprinting.com/)
- [Guides](https://carmichaelprinting.com/guides/)
- CMYK vs RGB: why colors shift in print

5 min read - updated November 2026

# CMYK vs RGB: why colors shift in print

RGB mixes red, green and blue light for screens, while CMYK mixes cyan, magenta, yellow and black ink for print. Some bright RGB colors cannot be made with ink, so they print duller, which is why artwork for full-color printing should be built in CMYK from the start.

Shown: a printed press sheet with color bars (stock photo)

Key points

- RGB is additive light; CMYK is subtractive ink
- CMYK stands for cyan, magenta, yellow and black (K is the key plate)
- Bright screen blues and greens print closer to navy and forest
- Design in CMYK, do not convert at the end
- Spot or Pantone colors are converted to CMYK for full-color jobs

If a logo looked electric on your monitor and a little flat on the printed card, nothing went wrong. A screen makes color by adding light, and paper can only reflect the light that falls on it. The two methods reach different ranges of color, and the difference shows most in vivid blues and greens.

## What is the difference between RGB and CMYK?

RGB is an additive color model: beams of red, green and blue light add together to make other colors, and every pixel on a screen is built from three tiny light sources. CMYK is a subtractive model used in color printing, where inks reduce the light reflected from a light background, so the paper supplies the white.

Black is the K because it was the key plate that other colors lined up to. Pure black type is usually printed with the black ink alone, so it stays sharp.

## Why do colors look different on paper?

The range of colors that ink on paper can show is smaller than what a monitor can glow. Our shop's rule of thumb is that the electric blue and electric green you see onscreen will print much closer to a navy blue and a forest green with offset CMYK printing.

Screens also change the picture. A monitor is lit from behind, differs from one brand to the next, and looks brighter at higher brightness settings. Paper is judged under the light of the room, and coated and uncoated stocks show the same ink differently.

Why do colors look different on paper? RGB CMYK

Used for Screens, cameras, websites Printed pieces

Primaries Red, green, blue Cyan, magenta, yellow, black

Mixing Adds light Subtracts light with ink

Brightest colors Vivid, glowing Duller in saturated blues and greens

## How to set up a file in CMYK

- Start a new document in a CMYK color mode.
- Pick colors from CMYK swatches, not from a screen eyedropper on a website.
- Convert photographs to CMYK and check them before you place them.
- Check that the final PDF contains no RGB objects.
- If a color is critical, ask for a printed proof and look at it in person.

## What about Pantone and spot colors?

If you submit a file for full-color printing that uses RGB or spot or Pantone colors, they are converted to CMYK, which can change some colors from what you see on screen. A color you matched on paper in advance is a safer reference than a monitor. If your brand has a precise color, tell us at the quote stage so the plan for ink and paper fits it.

## Black text and rich black

Small type should be a single black, not a mix of all four inks, because four plates can slip a hair out of line and fringe thin letters. Large solid black areas sometimes get a little help from other inks for depth. If you are not sure which you have, ask when you send the file.

## Seeing the difference before you print

Most layout programs have a soft proof or an overprint view that previews how colors will look in CMYK. Use it early, while you can still change a color, not at the end. A quick printed copy from an office printer also helps, though it will not match a press exactly.

### Sources (3)

- Wikipedia : [en.wikipedia.org/wiki/CMYK_color_model](https://en.wikipedia.org/wiki/CMYK_color_model) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/RGB_color_model](https://en.wikipedia.org/wiki/RGB_color_model) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Prepress](https://en.wikipedia.org/wiki/Prepress) (checked November 2026)

## Ready when you are

Send the file, a sample to match, or just the details. Most quotes within one business day.

[Get a quote](#quote)[Send a file](https://carmichaelprinting.com/send-a-file/)

## Keep reading

- [Why do my colors look different in print?](https://carmichaelprinting.com/faq/color-and-cmyk/)
- [Print-ready file checklist](https://carmichaelprinting.com/guides/file-prep-checklist-for-print/)
- [300 dpi and image resolution, explained](https://carmichaelprinting.com/guides/300-dpi-resolution-explained/)
- [Proofs and approvals: what to check](https://carmichaelprinting.com/guides/proofs-and-approvals/)

Questions

## Questions we hear

[All questions](https://carmichaelprinting.com/faq/)

### Can I design in RGB and convert later?

You can, but the colors will shift when you convert. Building in CMYK from the start lets you see the printed result while you design.

### Why does my logo look different on the proof than on my screen?

A proof shows how the colors reproduce in print. If a color matters, mention it when you approve the proof.

### Is CMYK used for black and white printing?

No. Black-only jobs use the black ink alone, so RGB or CMYK color mode matters only for color work.
