---
title: PDF Export Settings for Print: What to Choose
url: https://carmichaelprinting.com/guides/pdf-export-settings-for-print/
business: Carmichael Printing Company, Inc.
what: commercial printing, copying, graphic design and prepress, binding and finishing, mailing and fulfillment
phone: (916) 487-8679
email: service@carmichaelprinting.com
address: 5757 Robertson Avenue, Suite B, Carmichael, CA 95608 (one block off Fair Oaks Blvd)
hours: Mon-Fri 9:00 am - 4:30 pm, Sat-Sun closed
since: 1965
quotes: most within one business day
---

- [Home](https://carmichaelprinting.com/)
- [Guides](https://carmichaelprinting.com/guides/)
- PDF export settings for print

5 min read - updated November 2026

# PDF export settings for print

Export your print PDF at the finished page size with bleed included, fonts embedded, images at about 300 ppi and color set to CMYK. Use a press-quality or PDF/X preset if your program offers one, then open the exported PDF and check it before you send it.

Key points

- Choose a press-quality or PDF/X preset, not a small-file preset
- Embed all fonts
- Keep images at about 300 ppi
- Color in CMYK; avoid RGB for full-color jobs
- Include 1/8 inch bleed, and open the PDF to check it

A PDF is the file type printers prefer because it keeps fonts, images and layout together in one package. The catch is that a PDF made for email can be shrunk to screen quality, which is the wrong thing for a press. The settings below turn your layout into a PDF that holds up in print.

## The settings that matter

The settings that matter Setting Choose

Preset Press quality or PDF/X (not Smallest File Size)

Page size Finished trim size, with bleed added in the bleed box

Fonts Embed all; outline if the program offers it

Image resolution Keep at least 300 ppi at print size; do not downsample below it

Color CMYK

Marks Crop marks only if requested; keep bleed on

Pages Single pages, not printer spreads, unless told otherwise

## What PDF/X means

PDF/X is a family of PDF standards made to exchange files for printing. The Wikipedia entry notes that in PDF/X-1a all fonts need to be embedded and all images need to be CMYK or spot colors, which is exactly the discipline a press wants. If your software offers PDF/X-1a, it is a safe starting point for flat color jobs.

A PDF/X preset will refuse or warn when something is missing, such as an unembedded font. Treat the warning as help, not as an obstacle.

## How to check the PDF you made

- Open the exported file, not the layout document.
- Look at the page size; it should equal trim size plus bleed.
- Zoom to 400% on photos and small text to see whether they stay sharp.
- Check the document properties for the list of fonts and confirm they show as embedded.
- Page through the whole file one last time for typos and missing images.

## Common export mistakes

- Exporting with the email preset, which compresses images to screen quality
- Leaving RGB images in a job meant for four-color printing
- Exporting from a word processor, which can substitute fonts and move line breaks
- Cropping the PDF at the trim edge so the bleed disappears
- Sending a flattened screenshot or a PDF made from a photo of the page

## Files that are not PDFs

Other formats can be accepted, but a PDF is preferred because fonts not installed on our computers change the look and often the layout of a document. Files other than PDF need a hard copy sample, and we send a final PDF proof so you can see what the finished piece will look like. The shop cannot accept Microsoft Publisher, Visio, PrintShop or QuarkXPress files; export those to PDF. Our [print-ready file setup](https://carmichaelprinting.com/services/print-ready-file-setup/) can help when you are stuck.

## A short export routine

Before you export, save the layout under a new name, so the original stays editable. Choose the preset, set the bleed, and tick the box that embeds fonts. After exporting, keep the PDF and the layout in the same folder with the images and fonts used.

If anything changes later, such as a corrected phone number, change the layout and export again. Editing a finished PDF by hand is possible, but a fresh export is cleaner and less likely to leave an old number somewhere on the page.

### Sources (3)

- Wikipedia : [en.wikipedia.org/wiki/PDF/X](https://en.wikipedia.org/wiki/PDF/X) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Font_embedding](https://en.wikipedia.org/wiki/Font_embedding) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Prepress](https://en.wikipedia.org/wiki/Prepress) (checked November 2026)

## Ready when you are

Send the file, a sample to match, or just the details. Most quotes within one business day.

[Get a quote](#quote)[Send a file](https://carmichaelprinting.com/send-a-file/)

## Keep reading

- [Print-ready file checklist](https://carmichaelprinting.com/guides/file-prep-checklist-for-print/)
- [Fonts, embedding and outlining for print](https://carmichaelprinting.com/guides/fonts-and-outlining/)
- [Which file formats do you accept?](https://carmichaelprinting.com/faq/file-formats-we-accept/)
- [Print-ready file setup](https://carmichaelprinting.com/services/print-ready-file-setup/)

Questions

## Questions we hear

[All questions](https://carmichaelprinting.com/faq/)

### Should I send one PDF or separate pages?

One PDF with pages in reading order is easiest, unless a job such as a booklet has specific instructions for covers and inside pages.

### What if my PDF is over 15 MB?

Use the Send a File page for anything larger than 15 MB, or bring it in on a USB flash drive, CD or DVD.

### Can you fix a PDF with missing fonts?

Tell us what you see and send the file. Often the fix is to go back to the original layout and export again with fonts embedded.
