---
title: What Is Bleed in Printing? A Plain Guide
url: https://carmichaelprinting.com/guides/what-is-bleed/
business: Carmichael Printing Company, Inc.
what: commercial printing, copying, graphic design and prepress, binding and finishing, mailing and fulfillment
phone: (916) 487-8679
email: service@carmichaelprinting.com
address: 5757 Robertson Avenue, Suite B, Carmichael, CA 95608 (one block off Fair Oaks Blvd)
hours: Mon-Fri 9:00 am - 4:30 pm, Sat-Sun closed
since: 1965
quotes: most within one business day
---

- [Home](https://carmichaelprinting.com/)
- [Guides](https://carmichaelprinting.com/guides/)
- What is bleed in printing?

5 min read - updated November 2026

# What is bleed in printing?

Bleed is artwork that extends past the edge where the paper will be trimmed, so color or photos run cleanly to the edge of the finished piece. For most jobs, add 1/8 inch of bleed on every side that has color touching the edge.

Key points

- Standard bleed is 1/8 inch (0.125 in) beyond the trim
- Needed only where color or images touch the edge
- Keep text at least 1/8 inch inside the trim
- No bleed means a white border is added
- Die-cut shapes may need more than 1/8 inch

Presses print on sheets larger than the finished piece, and the sheet is cut down afterward. Because a cutter can never land exactly on the line, any color that is supposed to reach the edge must continue a little past it. That extra margin of artwork is the bleed, and it is the difference between a clean edge and a thin white sliver.

## Why printers need bleed

Paper is trimmed with a cutter that has a small, normal amount of movement. Our shop plans for a trim variance of plus or minus 1/16 inch. If a blue background stopped exactly at the finished edge, a cut that drifted 1/32 inch inward would leave a white line along one side.

With bleed, the blue continues 1/8 inch beyond the edge, so even a shifted cut lands inside the color. The bleed itself is cut away and never appears on the finished piece.

## How much bleed to add

Imperial-system bleeds are generally 1/8 inch from where the cut is made. The University of Minnesota's print shop puts it as 0.125 inch beyond the trimmed edge. Add it to the page size, so the document is 1/4 inch larger in each direction.

How much bleed to add Finished size Size with 1/8 in bleed

8.5 x 11 in 8.75 x 11.25 in

5.5 x 8.5 in 5.75 x 8.75 in

4 x 6 in postcard 4.25 x 6.25 in

3.5 x 2 in card 3.75 x 2.25 in

Some work needs extra: die-cut shapes sometimes call for 1/4 inch, and thick booklets can need more to allow for page creep. Ask before you build the file.

## Setting up bleed in common programs

- Create the document at the finished trim size.
- Open Document Setup (or the equivalent) and enter 0.125 in in every bleed box.
- Drag background colors and photos out to the red bleed guide, not just to the page edge.
- Leave text and logos at least 1/8 inch inside the trim.
- Export the PDF with the bleed included, and crop marks only if asked for.

## What happens if a file has no bleed

If artwork arrives without bleed, a white border is placed around it for printing. If you would rather have color to the edge, send a version with bleed, or tell us and we can talk about the options before you approve the proof.

A page with a white margin all the way around, and no color near an edge, does not need any bleed at all.

## Bleed versus safe area

Bleed pushes artwork outward; the safe area pulls important content inward. Together they protect a design on both sides of the cut. See [trim, safe area and margins](https://carmichaelprinting.com/guides/trim-safe-and-margins/) for the inner half of the rule.

## Bleed on folded and bound pieces

A brochure or a booklet cover has bleed on its outside edges only. The fold itself is not a cut edge, so an image that wraps across a fold does not need bleed at the crease. Pages inside a bound book bleed on the three trimmed sides, but not along the spine.

If a design has a full-page photo spread across two pages, remember to keep faces and key details clear of the center, where the fold or binding takes a little of the image.

### Sources (2)

- Wikipedia : [en.wikipedia.org/wiki/Bleed_(printing)](https://en.wikipedia.org/wiki/Bleed_(printing)) (checked November 2026)
- printing.umn.edu : [printing.umn.edu/tools/what-is-bleed.html](https://printing.umn.edu/tools/what-is-bleed.html) (checked November 2026)

## Ready when you are

Send the file, a sample to match, or just the details. Most quotes within one business day.

[Get a quote](#quote)[Send a file](https://carmichaelprinting.com/send-a-file/)

## Keep reading

- [Trim, safe area and margins](https://carmichaelprinting.com/guides/trim-safe-and-margins/)
- [Print-ready file checklist](https://carmichaelprinting.com/guides/file-prep-checklist-for-print/)
- [How should I set up bleed and trim?](https://carmichaelprinting.com/faq/bleeds-and-trim/)
- [Send a file](https://carmichaelprinting.com/send-a-file/)

Questions

## Questions we hear

[All questions](https://carmichaelprinting.com/faq/)

### Is bleed the same as a margin?

No. A margin is blank space inside the trim; bleed is artwork outside the trim that gets cut off.

### Do I need bleed on a letterhead?

Only if color or a graphic runs to the edge of the sheet. A letterhead with a white border around the artwork does not need bleed.

### Can you add bleed for me?

Often yes, by extending a background, but an image cannot always be stretched cleanly. It is simpler to build it into the design.
