---
title: What Is Trapping in Printing? Spread and Choke
url: https://carmichaelprinting.com/guides/what-is-trapping/
business: Carmichael Printing Company, Inc.
what: commercial printing, copying, graphic design and prepress, binding and finishing, mailing and fulfillment
phone: (916) 487-8679
email: service@carmichaelprinting.com
address: 5757 Robertson Avenue, Suite B, Carmichael, CA 95608 (one block off Fair Oaks Blvd)
hours: Mon-Fri 9:00 am - 4:30 pm, Sat-Sun closed
since: 1965
quotes: most within one business day
---

- [Home](https://carmichaelprinting.com/)
- [Guides](https://carmichaelprinting.com/guides/)
- What is trapping in printing?

4 min read - updated November 2026

# What is trapping in printing?

Trapping is a small overlap between two colors that touch, so that if the press plates shift slightly there is no white gap between them. A spread enlarges the lighter color into the darker one, while a choke shrinks the lighter color so the darker one overlaps it.

Key points

- Trapping prevents white gaps at color edges
- Spread: lighter color grows into the darker one
- Choke: the lighter background shrinks under the darker object
- Mostly matters for solid color areas, not photos
- We trap files we design, or on request

On a printing press, each ink goes down in its own pass. Even on a well-run press, the passes may be off from each other by a hair. Where two solid colors meet, that hair shows up as a thin white line unless the artwork has been trapped.

## Why gaps appear

A press builds a color image from separate plates, one per ink, and each must land in exactly the same place. When one plate is slightly off, called misregistration, the edge where two colors meet shows paper. Trapping compensates by making adjoining colors overlap a little, so the eye sees one clean edge instead of a sliver of white.

## Spread and choke

A spread is an overlap that extends a color into its neighbor, and a choke is an underlap that pulls a color back. In practice, the lighter color is the one that moves, because the darker color hides the overlap. The rule we follow is simple.

- Use a choke trap when the background is lighter than the object it surrounds
- Use a spread trap when the background is darker than the object it surrounds
- If the colors are similar in darkness, the trap is small and centered

Spread and choke Situation Trap

Dark text on a light background Choke the light background

Light text knocked out of a dark background Spread the light letters

Two light colors touching Small centered overlap

## When trapping matters

Trapping matters most for flat colors that touch: logos, charts, maps, and bold graphics with two or more spot or process colors. A photograph does not need it, because the image has no hard edge between two flat areas. Black text over a color is usually set to overprint, which avoids a gap in a different way.

## Who sets the trap?

We set trapping if we design your documents, or if you ask us to. Otherwise we assume the file has been trapped correctly. If you are unsure, you can send the file and ask whether it needs it, and we will tell you what we find.

## How to avoid the problem in design

- Share a color between touching objects when you can; touching shapes that share a cyan or magenta need less trapping
- Avoid thin outlines between two colors that are close in value
- Keep fine detail in a single color where possible
- Look at the proof edges at full size under good light

## How trapping connects to registration

Registration is how closely the separate ink plates line up with each other. A press that is in good register leaves hairline gaps only where artwork asks for tight colors, and a modest trap handles those. The two ideas work together: the pressman keeps the plates aligned, and the file includes small overlaps for what the press cannot hold perfectly.

Because trapping is a prepress matter, it is one more reason to send a PDF early. A file that arrives the day before a deadline leaves no room to look at the edges of touching colors.

## A simple test

Zoom in to 400 percent on any place where two flat colors meet. If one color simply stops at the exact edge of the other with no overlap, the artwork has no trap. For a one-color or black-only job, there is nothing to trap, because there is only one plate.

### Sources (3)

- Wikipedia : [en.wikipedia.org/wiki/Trap_(printing)](https://en.wikipedia.org/wiki/Trap_(printing)) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Offset_printing](https://en.wikipedia.org/wiki/Offset_printing) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Prepress](https://en.wikipedia.org/wiki/Prepress) (checked November 2026)

## Ready when you are

Send the file, a sample to match, or just the details. Most quotes within one business day.

[Get a quote](#quote)[Send a file](https://carmichaelprinting.com/send-a-file/)

## Keep reading

- [CMYK vs RGB: why colors shift in print](https://carmichaelprinting.com/guides/cmyk-vs-rgb/)
- [Print-ready file checklist](https://carmichaelprinting.com/guides/file-prep-checklist-for-print/)
- [Prepress file check](https://carmichaelprinting.com/services/prepress-file-check/)
- [Which file formats do you accept?](https://carmichaelprinting.com/faq/file-formats-we-accept/)

Questions

## Questions we hear

[All questions](https://carmichaelprinting.com/faq/)

### Do I need to trap a flyer with a photo?

No. A photo has no flat edges to trap; only touching flat colors do.

### How big is a trap?

Very small, a fraction of a point, enough to cover the misregistration of a press without being visible.

### Will you do trapping for me?

Yes, when we design your piece or when you ask for it.
