---
title: Print-Ready File Setup: Size, Bleed, Color in Carmichael, CA
url: https://carmichaelprinting.com/services/print-ready-file-setup/
business: Carmichael Printing Company, Inc.
what: commercial printing, copying, graphic design and prepress, binding and finishing, mailing and fulfillment
phone: (916) 487-8679
email: service@carmichaelprinting.com
address: 5757 Robertson Avenue, Suite B, Carmichael, CA 95608 (one block off Fair Oaks Blvd)
hours: Mon-Fri 9:00 am - 4:30 pm, Sat-Sun closed
since: 1965
quotes: most within one business day
---

- [Home](https://carmichaelprinting.com/)
- [Services](https://carmichaelprinting.com/services/)
- [Graphic design & prepress](https://carmichaelprinting.com/services/graphic-design-and-prepress/)
- Print-ready file setup

Graphic design & prepress

# Print-ready file setup

Print-ready file setup means building a document at its finished size with bleed, CMYK color, 300 ppi images and embedded fonts. You can set it up yourself using the numbers below, or Carmichael Printing's designer can do the setup for you.

Key points

- Build at the finished size, then add 1/8 inch bleed
- Keep text at least 1/8 inch inside the trim
- Use CMYK color and about 300 ppi at print size
- Embed or outline fonts, and export a PDF
- Book margins: at least 3/8 inch, with a 3/4 inch gutter

Most files that arrive at a print shop are one or two settings away from ready. The fixes are almost always the same, and they take minutes when made at the start and much longer after a proof has gone back and forth. This page is a plain list of those settings, with the shop's own numbers.

## The setup numbers

The setup numbers Setting Target

Bleed 1/8 inch past the trim on every edge with color

Safe area Text at least 1/8 inch inside the trim

Book margins At least 3/8 inch, gutter 3/4 inch

Image resolution About 300 ppi at the size it prints

Color mode CMYK from the start

Fonts Embedded or converted to outlines

Trim and fold variance Plus or minus 1/16 inch

## Worked example: a 4 by 6 inch postcard

Set the document to 4.25 by 6.25 inches so that 1/8 inch of bleed extends on each side. Keep names, dates and phone numbers inside a box that sits 1/8 inch inside the 4 by 6 trim. A photo that will print at 4 by 5 inches should measure about 1200 by 1500 pixels, which is 300 pixels per inch at that size.

## Export a PDF

- Finish the design at the final size with bleed
- Convert type to outlines, or embed the fonts
- Check that images are about 300 ppi at print size
- Export a PDF, and keep the bleed in the file
- Email it, upload it, or bring it on a drive

See [PDF export settings for print](https://carmichaelprinting.com/guides/pdf-export-settings-for-print/) for the details.

## If the file is not a PDF

We accept most types of electronic files, but a PDF is the best choice because it carries your fonts with it. Files in another format should come with a printed sample, so that any change in layout is easy to spot. The shop cannot accept Microsoft Publisher, Visio, PrintShop or QuarkXPress files, so export those to PDF before sending.

Images do best as TIF or EPS. Web graphics such as GIF, JPG and BMP are usually 72 ppi, and they often print poorly at larger sizes.

## Let us set it up

If setup is not how you want to spend an afternoon, send what you have. The designer can rebuild a document at the right size, add bleed, convert colors and send you a proof. Trapping is set when we design your document, or when you ask us to set it.

### Sources (2)

- Wikipedia : [en.wikipedia.org/wiki/Bleed_(printing)](https://en.wikipedia.org/wiki/Bleed_(printing)) (checked November 2026)
- Wikipedia : [en.wikipedia.org/wiki/Prepress](https://en.wikipedia.org/wiki/Prepress) (checked November 2026)

## Ready when you are

Send the file, a sample to match, or just the details. Most quotes within one business day.

[Get a quote](#quote)[Send a file](https://carmichaelprinting.com/send-a-file/)

## Related

- [Prepress file check](https://carmichaelprinting.com/services/prepress-file-check/)
- [What is bleed in printing?](https://carmichaelprinting.com/guides/what-is-bleed/)
- [300 dpi and image resolution, explained](https://carmichaelprinting.com/guides/300-dpi-resolution-explained/)
- [Trim, safe area and margins](https://carmichaelprinting.com/guides/trim-safe-and-margins/)
- [Send a file](https://carmichaelprinting.com/send-a-file/)
- [Graphic design & prepress](https://carmichaelprinting.com/services/graphic-design-and-prepress/)
- [Graphic design for print](https://carmichaelprinting.com/services/graphic-design/)
- [Logo design](https://carmichaelprinting.com/services/logo-design/)

Questions

## Questions we hear

[All questions](https://carmichaelprinting.com/faq/)

### What if my artwork has no bleed?

A white border is placed around the artwork for printing. If that is not what you want, tell us before the proof and we can discuss options.

### Should I build in RGB and convert later?

No. Artwork should be created in CMYK from the start, because RGB colors can look different after conversion.

### Can you check my setup before I send the final file?

Yes. Send it and we will check it for print-specific problems, then tell you what we find.
