Questions
How should I set up bleed and trim?
Extend any color or image that touches the edge 1/8 inch past the trim line on every side, and keep important text at least 1/8 inch inside the trim. Allow for a cutting variance of plus or minus 1/16 inch.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Key points
- Bleed: 1/8 inch beyond the trim on every edge that has color
- Keep text 1/8 inch inside the trim
- Cutting and folding vary by plus or minus 1/16 inch
- Books need margins of at least 3/8 inch
- No bleed means a white border
Paper is cut by automated equipment after it is printed, and no cut lands on the exact same line every time. Bleed and margins give that cut room to move without leaving a white sliver or slicing into your words.
What is a bleed?
A bleed is artwork that continues slightly beyond the page edge, so the printed color runs all the way to the edge after trimming. If you supply artwork without bleed, a white border will be placed around your artwork for printing.
How much room should I leave?
| Setup item | Amount |
|---|---|
| Bleed past each trim edge | 1/8 inch |
| Text inside the trim | At least 1/8 inch |
| Trim variance | Plus or minus 1/16 inch |
| Fold variance | Plus or minus 1/16 inch |
| Book page margins | At least 3/8 inch |
| Gutter (two 3/8 inch margins) | 3/4 inch |
What about folds?
Paper is made of fiber, so ink can crack along a fold. That cannot be avoided entirely. If it matters to you, avoid heavy ink coverage right where the fold will fall. Folding equipment also varies by about 1/16 inch, so keep small text and thin lines a little away from a fold.
What is the gutter in a book?
The gutter is the space between the text and the spine where pages fold together. Leaving at least 3/8 inch on every edge of each page gives you a 3/4 inch gutter in the middle of a spread, enough that words are not lost in the binding.
Can you add bleed for me?
Send what you have and we will review it. If we design the piece, we build the bleed in.
Why can a thin border look uneven?
A border very close to the edge can look thicker on one side when the cut shifts by a hair, so keep borders inside the safe area or let color bleed off.
Start a job
Tell us about your print job.
Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.
(916) 487-8679Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
