Providing personalized printing solutions for over six decades5757 Robertson Ave, Ste B, Carmichael · one block off Fair Oaks Blvd(916) 487-8679
Carmichael Printing Company, Inc.(916) 487-8679

Products - Books & bound

Manuals

A manual is a printed reference that tells people how to do something, such as operating equipment, following a procedure or learning a job. Carmichael Printing prints manuals in Carmichael, and coil and perfect binding are among its bindery services.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Coil-bound book

Key points

  • Training, operating and procedure manuals
  • Coil bound to lie flat, or perfect bound with a spine
  • Mostly black type and line art keeps jobs efficient
  • Hole punching for binders on request
  • Most quotes within one business day

A manual lives on a workbench, a front desk or a classroom table. It gets opened over and over, written on, and sometimes dropped. So the details that matter most are practical: pages that stay in order, a binding that lets the book lie flat, and type sharp enough to read at arm's length. These jobs are often mostly black type and diagrams, which also makes them a good fit for high-speed duplication.

Coil, spine or binder?

How the manual is used should pick the binding. A coil lets pages fold all the way back, so the book stays flat on a bench while someone follows the steps. A perfect-bound spine looks tidy on a shelf, and carries the title along the edge. If pages get replaced when procedures change, drilling the sheets for a ring binder is often the most practical answer.

Coil, spine or binder?
UseBinding to consider
Followed step by step at a bench or deskCoil
Kept on a shelf as a referencePerfect binding
Pages updated from time to timeDrilled for a binder

Setting up pages people can follow

  • Number every page, and repeat the title of the section at the top
  • Use short numbered steps for procedures
  • Keep diagrams and screen captures at 300 pixels per inch or higher
  • Leave a wider inside margin where the binding will take space
  • Keep text at least 3/8 inch from every edge

Copying or printing a manual

Mostly black type and graphics, many pages and many copies are the conditions where high-speed duplication can be the economical choice. When pages carry color diagrams or photos, offset printing may serve better. We look at the job and offer the most cost-effective option. Read more about copying and how it compares to printing.

Tabs and divider pages

A long manual is much easier to use with chapter divider sheets. We can print the divider pages on a heavier paper, and collate them in order with the rest of the book. Mention it in your quote request so the collating is planned from the start, and see collating.

Keeping manuals current

Procedures change. If we produced your original, the design files are kept for a minimum of two years, so a revision can pick up where the last one stopped. A printed copy also works as a starting point, since we can reproduce and edit it without the original file.

How a job works

  1. Send or bring itUpload a file, email it, or bring a printed sample to the shop.
  2. Quote and proofMost quotes within one business day. You approve a proof before anything prints.
  3. Print and finishPrinted in Carmichael, with trimming and finishing from our bindery services.
  4. Come by the shop5757 Robertson Ave, one block off Fair Oaks Blvd, Monday to Friday, 9:00 am to 4:30 pm.

Questions

Questions we hear

All questions

Can you do a manual that goes in a three-ring binder?

Yes. We can drill the sheets so they fit your binder, and print divider pages if you want them.

Is there a limit to how many pages a coil-bound manual can have?

Coils come in different diameters, so it depends on the page count and paper. Tell us what you have and we will say what suits it.

Can you print a manual from an old printed copy?

Yes. We can reproduce and edit existing printed materials even without the original digital files.

Start a job

Tell us about your print job.

Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.

(916) 487-8679

Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Job jacket · Carmichael Printing

Request a quote

The job
We confirm dates with your quote.

PDF preferred. Also AI, EPS, PSD, INDD, JPG, PNG, TIF, DOC or ZIP. We cannot accept Publisher, Visio, PrintShop or QuarkXPress files, so export those to PDF. Up to 5 files, 20 MB in all, sent exactly as you upload them. No file? Attach a photo of the piece you want reprinted.

You

Phone or email, whichever you prefer. Your details and files go only to Carmichael Printing. Most quotes within one business day; we answer Monday to Friday, 9:00 am to 4:30 pm.