Print glossary
Print terms D to F
This page defines the print terms from D to F, including digital printing, dpi and four-color process. Each definition notes when a customer is likely to hear it.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Print terms D to F
- Digital printing
- Printing straight from a computer file without making printing plates. It is the method behind short runs and copy work.
- Dot gain
- The effect of printed halftone dots spreading slightly as ink soaks into paper, which makes images look a bit darker than the file.
- dpi and ppi
- Dots per inch and pixels per inch measure image detail. Images for print should be about 300 pixels per inch at the size they will print.
- Duotone
- A photo printed with two inks, often black plus one color, to give it a tinted look.
- Duplex printing
- Printing on both sides of a sheet. A quote may ask whether your piece is one-sided or duplex.
- Dummy
- A blank folded mock-up of a booklet or folder in the real paper, so you can see its size, weight and feel before printing.
- Embedded font
- A font stored inside a PDF so text looks the same on every computer. Printers ask for embedded or outlined fonts.
- EPS file
- Encapsulated PostScript, a graphics file format that holds sharp, scalable artwork. It is one of the image formats printers prefer.
- Finished size
- The size of a piece after it has been trimmed and folded. Always tell your printer the finished size, not just the paper size.
- Flat size
- The size of a piece before folding, such as the full sheet of a brochure opened out.
- Flood
- Covering a whole sheet or a large area with ink or a coating. A flood of solid color needs bleed.
- Four-color process
- Printing full color by layering cyan, magenta, yellow and black inks. It is another name for CMYK printing.
- FPO
- For position only, a low-resolution placeholder image in a layout. A proof marked FPO means the real image is still to come.
Many terms in this range describe how a file turns into ink on paper, and a few describe size. They show up in conversations about image resolution, proofs and page setup.
What is the difference between flat size and finished size?
Flat size is the piece opened out before folding, and finished size is what you hold after trimming and folding.
Which image resolution should I use?
Use about 300 pixels per inch at the size the image will print.
Start a job
Tell us about your print job.
Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.
(916) 487-8679Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
