Print glossary
Print terms Q to S
This page defines print terms from Q to S, including RGB, registration, safe area and spot color. Each is tied to the point in a project where it comes up.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Print terms Q to S
- Raster image
- Another name for a bitmap image, made of pixels. It is the opposite of a vector graphic.
- Registration
- How well the different ink colors line up on the page. Poor registration shows as colored edges or gaps.
- Resolution
- The amount of detail in an image, measured in pixels per inch. Photos for print need about 300 at the size they will print.
- Reverse type
- Light type on a dark background, with the letters left unprinted. Thin, small reversed letters can fill in, so choose a sturdy font.
- RGB
- Red, green and blue, the colors of light used by screens. RGB files are converted to CMYK for printing, which can shift colors.
- Rich black
- A deep black built by mixing CMYK inks, used for large black areas. Small black text stays in plain black ink.
- Run length
- The number of copies in a print run. It is the quantity you give for a quote.
- Safe area
- The zone inside the trim where text and logos are kept, at least 1/8 inch from the edge, so trimming cannot cut into them.
- Sans serif and serif
- Serif type has small strokes at letter ends, and sans serif type does not. The two are often paired in a layout.
- Self cover
- A booklet whose cover is printed on the same paper as the inside pages.
- Sheet-fed press
- A press that prints one cut sheet at a time, rather than from a roll. Most commercial printing of cards and flyers is done this way.
- Spot color
- A single premixed ink, often a Pantone color, printed on its own plate. If its name changes between parts of a file, it prints as separate plates.
- Spread
- A trapping adjustment that enlarges a lighter object so it slightly overlaps a darker background, to cover a small misregistration.
- Stock
- The paper or board a job is printed on. A quote lists the stock by type and weight.
Safe area, spot color and resolution are the Q to S words that most often decide whether a file is print-ready, while run length and stock show up in the quote.
Is rich black needed for all black?
No. Use plain black for small text and rich black for big solid areas.
How is spot color different from CMYK?
A spot color is one special ink, while CMYK builds a color from four inks.
Start a job
Tell us about your print job.
Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.
(916) 487-8679Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
