Providing personalized printing solutions for over six decades5757 Robertson Ave, Ste B, Carmichael · one block off Fair Oaks Blvd(916) 487-8679
Carmichael Printing Company, Inc.(916) 487-8679

6 min read - updated November 2026

Booklet page counts and creep

A saddle-stitched booklet needs a page count that is a multiple of four, because each folded sheet makes four pages. Creep is the way inner pages push outward when sheets are nested and folded, so thicker booklets need wider outside margins and trimming to even the edge.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Open magazines / booklets close-up

Key points

  • Each sheet folded once makes 4 pages
  • Page count must be a multiple of 4 for saddle stitching
  • The cover can be the same paper or heavier
  • Creep pushes inner pages outward as sheets stack
  • Thicker booklets need more outside margin

Booklet planning starts with arithmetic: pages come in fours. After that, the physical thickness of the paper changes the layout. Understanding both before you design lets you avoid blank pages and text that gets trimmed.

How page counts work

Fold a sheet in half and you have four pages: two on the front and two on the back. Nest several folded sheets inside each other, staple through the fold, and you have a saddle-stitched booklet. So the page count is always 4, 8, 12, 16 and so on. A 16 page booklet uses 4 sheets, and a 20 page booklet uses 5.

How page counts work
PagesSheets (folded)
82
123
164
205
246

What if I have 14 pages of content?

Round up to 16 and plan the two extra pages on purpose: a title page, a notes page, a map or an ad for your own services. Blank pages at the end look unplanned, while a notes page looks useful. The count includes the covers, so a booklet of 16 pages includes the four cover pages if the cover is the same sheet.

What is creep?

When folded sheets nest, the sheets inside have to wrap around the ones outside. Each sheet has thickness, so the innermost pages stick out slightly farther than the outer ones. After trimming the front edge flat, the inner pages lose a little more margin than the outer ones. This is creep, and it grows with page count and heavier paper.

  • Few pages on thin paper: creep is barely noticeable
  • More pages or thicker paper: inner margins narrow visibly
  • Fix: keep a generous outside margin, and tell us the page count and paper so the layout can be adjusted

Planning the layout

  1. Decide the finished page size, for example 5.5 x 8.5 inches.
  2. Settle the page count in multiples of 4.
  3. Keep text at least 3/8 inch from the outside edges.
  4. Leave the gutter clear of text.
  5. Send the pages in reading order, single pages, unless told otherwise.

When a booklet needs a different binding

Saddle stitching has a practical limit on thickness, because too many sheets will not nest and fold cleanly. When the page count grows, other bindings take over. See saddle stitch vs perfect vs coil binding, and ask us what suits your page count.

Covers and inside pages

Many booklets use a heavier sheet for the cover and a lighter text paper inside. The cover wraps around the inside sheets and adds four pages of its own, so a booklet with a separate cover and 16 inside pages is 20 pages in all. Tell us whether the cover is printed on a heavier stock and whether it carries printing on the inside as well.

If your booklet has a page count that is not a multiple of four, the empty pages fall at the back. Plan them as useful pages so the booklet feels finished.

Asking for a quote on a booklet

Tell us the finished page size, the number of pages, whether the cover is a different paper, the quantity and the ink colors. With those five items we can quote the job and advise on margins for the page count.

Page numbers and the sequence

Pages in a booklet are printed in a different order on the sheet than the order you read them, a process called imposition. You do not need to set that up yourself; send single pages in reading order, and the arrangement on the sheet is handled in prepress.

Sources (3)

Questions

Questions we hear

All questions

Can I have 10 pages?

Not in a standard saddle-stitched booklet; round to 12 and plan the spare pages.

Do covers count?

If the cover is printed on the same sheets, yes. If a separate heavier cover is added, it adds four pages of its own.

How much margin does creep need?

It depends on the page count and paper. Tell us both and we will advise.

Start a job

Tell us about your print job.

Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.

(916) 487-8679

Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Job jacket · Carmichael Printing

Request a quote

The job
We confirm dates with your quote.

PDF preferred. Also AI, EPS, PSD, INDD, JPG, PNG, TIF, DOC or ZIP. We cannot accept Publisher, Visio, PrintShop or QuarkXPress files, so export those to PDF. Up to 5 files, 20 MB in all, sent exactly as you upload them. No file? Attach a photo of the piece you want reprinted.

You

Phone or email, whichever you prefer. Your details and files go only to Carmichael Printing. Most quotes within one business day; we answer Monday to Friday, 9:00 am to 4:30 pm.