Providing personalized printing solutions for over six decades5757 Robertson Ave, Ste B, Carmichael · one block off Fair Oaks Blvd(916) 487-8679
Carmichael Printing Company, Inc.(916) 487-8679

5 min read - updated November 2026

What is thermography (raised printing)?

Thermography is a printing process in which a powder is added to wet ink and then heated, so the ink rises into raised lettering with a look similar to engraving. Carmichael Printing offers thermography for business cards, invitations and letterhead.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Loupe on a press sheet color bar

Key points

  • Slow-drying ink is printed where the raised area goes
  • Powder is applied and sticks only to the wet ink
  • Heat melts the powder and the ink swells and hardens
  • The result is raised type that looks like engraving
  • Common on cards, invitations and letterhead

Run a thumb over a fine business card and feel the letters stand up from the page. That is probably thermography. It is a finishing step added to ordinary printing, and it is a classic choice when you want a card or letterhead that is noticed by touch before it is read.

How thermography works

The process starts with regular printing, using a slow-drying ink in the areas to be raised. Plastic-resin powder is applied to the sheet, and a vacuum removes the loose powder from the unprinted areas. The sheet then passes through a radiant oven, where the powder melts and fuses with the ink. As it cools the material solidifies into a raised image.

  1. Print the design with slow-drying ink
  2. Apply thermographic powder, which clings to the wet ink
  3. Vacuum off the powder from the unprinted areas
  4. Heat the sheet so the powder melts and swells
  5. Let it cool and harden

Thermography vs engraving

Engraving presses the paper into a cut plate to push ink up. Thermography imitates that look with powder and heat, and it is described as a low-cost alternative to engraved embossing. Up close the two are different, so ask to see a sample. See embossing for pressed designs.

What it is used for

Raised printing is typically used on business cards, letterheads, wedding and event invitations, greeting cards and packaging. It suits a name, a logo or a short line of text. It is a favorite for professional offices and anyone who wants a piece that feels different.

Designing for raised ink

Simple designs work best: a clean logo, a name, a line of contact details. Tell us where the raised areas go and which parts stay flat. Because the ink must stay wet while the powder is applied, the raised parts are printed in a separate step, so a proof is especially worth reading.

Ordering raised printing

Bring or send your artwork, and say how many sets you want. See thermography for the service page and ask whether thermography would work well with your project. Business cards with raised printing can be matched to letterhead and envelopes in the same ink color.

Where thermography came from

Cards printed from an engraved plate were once seen as a sign of professionalism, and thermography was developed as a less expensive way to simulate that effect. That history explains why the process is still linked with business cards, letterhead and formal invitations.

Today the look is a choice rather than a necessity. Some offices want it for a high-end feel, and some like a flat card. Either way, ask us which suits your piece; we can show you samples of previous work.

Questions to ask when you order

Ask which parts of the design can be raised and which stay flat, how the raised ink will look on your chosen paper and whether a matching letterhead and envelope should be raised too. Ask to see a sample of raised ink in the color you want, since the color of raised ink can look different from flat ink.

  • Which elements will be raised
  • Ink color and paper stock
  • Whether to raise the whole set or only the card

A note on paper and ink

The process works on paper that can take the heat. Heavier card stock is a common choice for business cards and invitations. Ask which of our stocks works best with raised ink, and choose a flat ink color that matches the raised color if the piece also has flat printing, so the whole piece looks like one design.

Sources (2)

Questions

Questions we hear

All questions

Is thermography the same as embossing?

No. Thermography raises ink with powder and heat; embossing presses the paper itself.

Can I get a raised logo on a business card?

Yes. That is a common use. Send your logo and we will advise on the design.

Is raised printing a good fit for a photo?

It is better for type and simple artwork than for photos.

Start a job

Tell us about your print job.

Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.

(916) 487-8679

Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Job jacket · Carmichael Printing

Request a quote

The job
We confirm dates with your quote.

PDF preferred. Also AI, EPS, PSD, INDD, JPG, PNG, TIF, DOC or ZIP. We cannot accept Publisher, Visio, PrintShop or QuarkXPress files, so export those to PDF. Up to 5 files, 20 MB in all, sent exactly as you upload them. No file? Attach a photo of the piece you want reprinted.

You

Phone or email, whichever you prefer. Your details and files go only to Carmichael Printing. Most quotes within one business day; we answer Monday to Friday, 9:00 am to 4:30 pm.