Providing personalized printing solutions for over six decades5757 Robertson Ave, Ste B, Carmichael · one block off Fair Oaks Blvd(916) 487-8679
Carmichael Printing Company, Inc.(916) 487-8679

5 min read - updated November 2026

Lamination: options and when to laminate

Laminate a printed piece when it will be handled, wiped, folded or displayed often, because a thin plastic film protects it from creases, fading, water and fingerprints. Carmichael Printing offers laminating along with printing and finishing.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Loupe on a press sheet color bar

Key points

  • Gloss brightens color; matte reduces glare
  • Soft-touch adds a velvety feel
  • Thermal lamination uses heat and cold-roll uses pressure
  • Film thickness is measured in mils, or thousandths of an inch
  • Laminated pieces cannot be written on the same way

Lamination bonds a layer of plastic film to paper or card. It is often used on menus, ID cards, signs, covers, checklists and anything that gets wet hands. It is not right for everything, so here are the choices and when each makes sense.

Finish options

The film comes in a few finishes, and the choice changes how the piece looks and feels.

Finish options
FinishLook and feelGood for
GlossShiny, vibrant colorPhotos, covers, menus
MatteFlat, less glareReading under bright light
Soft-touchVelvety, thin polymerCards and covers you hold

Thermal, cold-roll and pouch

Thermal lamination uses heated rollers to melt adhesive on the film and press it to the sheet. It is fast and widely used for protecting printed documents. Cold-roll film has an adhesive under a backing that you peel away, so no heat is needed, which suits heat-sensitive materials. Pouch lamination seals a sheet inside a plastic pouch that runs through heated rollers.

Ask us which method suits your piece. See laminating.

How thick should it be?

Film is measured in mils, where one mil is one thousandth of an inch. Common pouch thicknesses are 3, 5, 7 and 10 mil, which is about 76, 127, 178 and 254 micrometers. A thin film keeps a piece flexible, and a thick film makes it stiff and rigid, like a card.

When to laminate

Laminate what gets touched, wiped or hung up. Do not laminate what changes often, since the whole piece has to be replaced to update it.

Some pieces are better left unlaminated: forms that people will write on with a pen, and anything that needs to be folded sharply after printing.

  • Restaurant menus and table cards
  • Checklists, instruction sheets and reference cards
  • Signs and posters in a place that gets wet or handled
  • ID cards, membership cards and tags
  • Book and booklet covers

How to order laminating

Tell us the sheet size, the count, the finish and whether one side or both sides need film. If the piece will be trimmed after lamination, say so, since trimming after film bonding leaves the edge sealed or open depending on the method. See restaurant menu options and trimming and cutting.

Lamination and the rest of the job

Laminate last. Everything else, including folding, scoring and trimming, is better planned around the film. A sheet with a sharp fold may crack along the crease, so ask about scoring first. See scoring.

If a laminated piece will be mailed, check the weight and the thickness against the mail limits in letter vs flat sizes, since a film adds a little thickness.

  • Order of work: print, cut to size, laminate, trim
  • Ask for a proof before you order the full count

Lamination or a heavier paper?

Sometimes a thicker card does the job without film. If you want to protect a surface from water and wear, lamination does that. If you only want stiffness, a heavier stock may be enough. Ask us which suits your piece. See paper weight explained.

What to tell us for a laminating quote

Give us the size of the sheet, how many you have, the finish you want and whether you need film on one or both sides. Mention how the piece will be used, whether on a wall, a counter or a clipboard, and we can suggest a film thickness. If the sheets are already printed, bring a sample so we can look at the paper.

Sources (2)

Questions

Questions we hear

All questions

Is laminating the same as coating?

No. Lamination bonds a plastic film to the sheet; a coating is applied to the printed surface.

Can I write on a laminated sheet?

Not with a pen in the usual way. Dry-erase markers can work on some laminated surfaces.

Can you laminate my own printed pieces?

Often, yes. Bring them in or tell us what you have.

Start a job

Tell us about your print job.

Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.

(916) 487-8679

Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Job jacket · Carmichael Printing

Request a quote

The job
We confirm dates with your quote.

PDF preferred. Also AI, EPS, PSD, INDD, JPG, PNG, TIF, DOC or ZIP. We cannot accept Publisher, Visio, PrintShop or QuarkXPress files, so export those to PDF. Up to 5 files, 20 MB in all, sent exactly as you upload them. No file? Attach a photo of the piece you want reprinted.

You

Phone or email, whichever you prefer. Your details and files go only to Carmichael Printing. Most quotes within one business day; we answer Monday to Friday, 9:00 am to 4:30 pm.