Graphic design & prepress
Print-ready file setup
Print-ready file setup means building a document at its finished size with bleed, CMYK color, 300 ppi images and embedded fonts. You can set it up yourself using the numbers below, or Carmichael Printing's designer can do the setup for you.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Key points
- Build at the finished size, then add 1/8 inch bleed
- Keep text at least 1/8 inch inside the trim
- Use CMYK color and about 300 ppi at print size
- Embed or outline fonts, and export a PDF
- Book margins: at least 3/8 inch, with a 3/4 inch gutter
Most files that arrive at a print shop are one or two settings away from ready. The fixes are almost always the same, and they take minutes when made at the start and much longer after a proof has gone back and forth. This page is a plain list of those settings, with the shop's own numbers.
The setup numbers
| Setting | Target |
|---|---|
| Bleed | 1/8 inch past the trim on every edge with color |
| Safe area | Text at least 1/8 inch inside the trim |
| Book margins | At least 3/8 inch, gutter 3/4 inch |
| Image resolution | About 300 ppi at the size it prints |
| Color mode | CMYK from the start |
| Fonts | Embedded or converted to outlines |
| Trim and fold variance | Plus or minus 1/16 inch |
Worked example: a 4 by 6 inch postcard
Set the document to 4.25 by 6.25 inches so that 1/8 inch of bleed extends on each side. Keep names, dates and phone numbers inside a box that sits 1/8 inch inside the 4 by 6 trim. A photo that will print at 4 by 5 inches should measure about 1200 by 1500 pixels, which is 300 pixels per inch at that size.
Export a PDF
- Finish the design at the final size with bleed
- Convert type to outlines, or embed the fonts
- Check that images are about 300 ppi at print size
- Export a PDF, and keep the bleed in the file
- Email it, upload it, or bring it on a drive
See PDF export settings for print for the details.
If the file is not a PDF
We accept most types of electronic files, but a PDF is the best choice because it carries your fonts with it. Files in another format should come with a printed sample, so that any change in layout is easy to spot. The shop cannot accept Microsoft Publisher, Visio, PrintShop or QuarkXPress files, so export those to PDF before sending.
Images do best as TIF or EPS. Web graphics such as GIF, JPG and BMP are usually 72 ppi, and they often print poorly at larger sizes.
Let us set it up
If setup is not how you want to spend an afternoon, send what you have. The designer can rebuild a document at the right size, add bleed, convert colors and send you a proof. Trapping is set when we design your document, or when you ask us to set it.
Sources (2)
- Wikipedia: en.wikipedia.org/wiki/Bleed_(printing) (checked November 2026)
- Wikipedia: en.wikipedia.org/wiki/Prepress (checked November 2026)
What if my artwork has no bleed?
A white border is placed around the artwork for printing. If that is not what you want, tell us before the proof and we can discuss options.
Should I build in RGB and convert later?
No. Artwork should be created in CMYK from the start, because RGB colors can look different after conversion.
Can you check my setup before I send the final file?
Yes. Send it and we will check it for print-specific problems, then tell you what we find.
Start a job
Tell us about your print job.
Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.
(916) 487-8679Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
