5 min read - updated November 2026
CMYK vs RGB: why colors shift in print
RGB mixes red, green and blue light for screens, while CMYK mixes cyan, magenta, yellow and black ink for print. Some bright RGB colors cannot be made with ink, so they print duller, which is why artwork for full-color printing should be built in CMYK from the start.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Key points
- RGB is additive light; CMYK is subtractive ink
- CMYK stands for cyan, magenta, yellow and black (K is the key plate)
- Bright screen blues and greens print closer to navy and forest
- Design in CMYK, do not convert at the end
- Spot or Pantone colors are converted to CMYK for full-color jobs
If a logo looked electric on your monitor and a little flat on the printed card, nothing went wrong. A screen makes color by adding light, and paper can only reflect the light that falls on it. The two methods reach different ranges of color, and the difference shows most in vivid blues and greens.
What is the difference between RGB and CMYK?
RGB is an additive color model: beams of red, green and blue light add together to make other colors, and every pixel on a screen is built from three tiny light sources. CMYK is a subtractive model used in color printing, where inks reduce the light reflected from a light background, so the paper supplies the white.
Black is the K because it was the key plate that other colors lined up to. Pure black type is usually printed with the black ink alone, so it stays sharp.
Why do colors look different on paper?
The range of colors that ink on paper can show is smaller than what a monitor can glow. Our shop's rule of thumb is that the electric blue and electric green you see onscreen will print much closer to a navy blue and a forest green with offset CMYK printing.
Screens also change the picture. A monitor is lit from behind, differs from one brand to the next, and looks brighter at higher brightness settings. Paper is judged under the light of the room, and coated and uncoated stocks show the same ink differently.
| RGB | CMYK | |
|---|---|---|
| Used for | Screens, cameras, websites | Printed pieces |
| Primaries | Red, green, blue | Cyan, magenta, yellow, black |
| Mixing | Adds light | Subtracts light with ink |
| Brightest colors | Vivid, glowing | Duller in saturated blues and greens |
How to set up a file in CMYK
- Start a new document in a CMYK color mode.
- Pick colors from CMYK swatches, not from a screen eyedropper on a website.
- Convert photographs to CMYK and check them before you place them.
- Check that the final PDF contains no RGB objects.
- If a color is critical, ask for a printed proof and look at it in person.
What about Pantone and spot colors?
If you submit a file for full-color printing that uses RGB or spot or Pantone colors, they are converted to CMYK, which can change some colors from what you see on screen. A color you matched on paper in advance is a safer reference than a monitor. If your brand has a precise color, tell us at the quote stage so the plan for ink and paper fits it.
Black text and rich black
Small type should be a single black, not a mix of all four inks, because four plates can slip a hair out of line and fringe thin letters. Large solid black areas sometimes get a little help from other inks for depth. If you are not sure which you have, ask when you send the file.
Seeing the difference before you print
Most layout programs have a soft proof or an overprint view that previews how colors will look in CMYK. Use it early, while you can still change a color, not at the end. A quick printed copy from an office printer also helps, though it will not match a press exactly.
Sources (3)
- Wikipedia: en.wikipedia.org/wiki/CMYK_color_model (checked November 2026)
- Wikipedia: en.wikipedia.org/wiki/RGB_color_model (checked November 2026)
- Wikipedia: en.wikipedia.org/wiki/Prepress (checked November 2026)
Can I design in RGB and convert later?
You can, but the colors will shift when you convert. Building in CMYK from the start lets you see the printed result while you design.
Why does my logo look different on the proof than on my screen?
A proof shows how the colors reproduce in print. If a color matters, mention it when you approve the proof.
Is CMYK used for black and white printing?
No. Black-only jobs use the black ink alone, so RGB or CMYK color mode matters only for color work.
Start a job
Tell us about your print job.
Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.
(916) 487-8679Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
