5 min read - updated November 2026
Print-ready file checklist
A print-ready file is a PDF at the finished size with images at 300 pixels per inch, colors built in CMYK, 1/8 inch of bleed and all fonts embedded or outlined. Check those items, plus text kept at least 1/8 inch inside the trim, before you send the file to the printer.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Key points
- Send a PDF whenever you can
- Images at 300 ppi at the size they will print
- Color built in CMYK, not RGB
- 1/8 inch bleed; text 1/8 inch inside the trim
- Fonts embedded or turned into outlines
Most delays in printing come from a file that looks fine on screen but is not ready for a press. A few minutes with a checklist catches the usual problems before they cost you a day. The list below is the one a printer's prepress desk works through, in the order that makes problems easiest to find.
The 12-point checklist
- Set the page to the finished trim size, not the paper size.
- Add 1/8 inch of bleed on every edge where color or a photo touches the edge.
- Keep text and logos at least 1/8 inch inside the trim line.
- For books, keep margins at least 3/8 inch, with a 3/4 inch gutter on the binding side.
- Use images at 300 ppi at the size they will print.
- Build color in CMYK from the start.
- Convert or embed every font so the text cannot re-flow.
- Link or embed all images; do not leave screen-resolution copies in the layout.
- Avoid heavy ink coverage right on a fold line.
- Proofread every word, phone number and date yourself.
- Export to PDF and open the PDF, not the original, to check it.
- Name the file clearly and send your name and job details with it.
Which file format should I send?
A PDF is the preferred format because it carries the fonts and the layout inside one file. Files in other formats can be accepted, but they should come with a printed sample so the layout can be checked against it. The shop cannot accept Microsoft Publisher, Visio, PrintShop or QuarkXPress files, so export those to a PDF first.
For images on their own, TIF and EPS work best for commercial printing. JPG photos from a camera may be fine, depending on the resolution setting they were taken at. See PDF export settings for print for how to make the PDF.
How tight are trimming and folding?
Automated cutters and folders vary by about plus or minus 1/16 inch. Design with that in mind: a thin border close to the edge or text close to a fold can look uneven even when the machine is working correctly.
Paper is made of fibers, so ink can crack along a fold. If that matters, avoid solid heavy color across the fold line.
Not sure it is ready? Send it anyway
We would rather see a file than guess about it. Send it and we will look for print problems, and tell you what we find before anything is printed. We check for print-specific issues only; we do not rewrite your design or correct spelling, so proofreading stays with you. Files 15 MB or smaller can be emailed; larger ones go through the Send a File page, and a USB drive, CD or DVD is always accepted at the shop.
Why each item is on the list
Bleed and trim exist because cutting is never exact; bleed hides the variance. Resolution matters because a press cannot add detail that a low-resolution image never had, and 300 dpi is the standard target. Color is checked because RGB colors shift when converted to ink. Fonts are checked because a computer without your font will substitute another, and the text can change size or shift lines.
Sources (3)
- Wikipedia: en.wikipedia.org/wiki/Prepress (checked November 2026)
- Wikipedia: en.wikipedia.org/wiki/PDF/X (checked November 2026)
- printing.umn.edu: printing.umn.edu/tools/what-is-bleed.html (checked November 2026)
What happens if my file has no bleed?
If color or a photo reaches the edge and the artwork arrives without bleed, a white border is placed around it for printing, which usually is not what the designer intended.
Do I have to fix everything myself?
No. Send what you have and we will tell you what needs to change. Our in-house graphic design can also prepare or rebuild a file when that is easier.
Will you check my spelling?
No. We look for print problems only, so proofreading is the customer's responsibility at the proof stage.
Start a job
Tell us about your print job.
Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.
(916) 487-8679Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
