Binding & finishing
Stapling
Stapling fastens a set of printed pages with metal wire stitches, placed in a corner, along the left side or through the center fold of a booklet. Carmichael Printing wire stitches packets, handouts and booklets as one of its bindery services, so the sets are ready to hand out.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Key points
- Corner staple: quick, for short sets
- Side wire stitches: for sets that need a firmer hold
- Saddle stitch: wire stitches through a fold, for booklets
- Sets are collated before stapling
- Fine for sets up to the staple's capacity
Stapling is the simplest bind there is, and still the right one for most short documents. A corner staple holds a three-page handout, two side wire stitches hold a thicker report, and a pair of wire stitches through the fold hold a booklet. The trick is choosing the style that matches how the piece will be used.
Three kinds of stapling
| Style | Where the wire stitches go | Good for |
|---|---|---|
| Corner | One staple, upper left corner at an angle | Handouts and short documents |
| Side | Two or more wire stitches along the left edge | Reports, packets and agendas |
| Saddle | Two wire stitches through the center fold | Booklets and programs |
Before the staple
Pages have to be in order, so stapling follows collating. The set is then squared up and fastened, and the wire stitches are placed so they hold without crushing text. When a packet will go in a binder later, say so, because wire stitches and drilled holes do not mix well.
Staple position and your layout
A corner or side staple sits close to the edge, so leave at least 3/8 inch of margin on that side, and more if the page will be punched or turned often. If the set is thick enough that the staple will not close, we will tell you before the job runs and suggest coil binding instead.
Stapling in the middle of a bigger job
Stapling is often the last step of a job that began with copying or printing, such as a stack of training handouts. Tell us the page count per set and how many sets, and the whole job can be quoted as one.
What to tell us for a stapling quote
Tell us how many sets you need, how many sheets are in each one, the paper, and where the staple should go. If the sets are loose today, we can collate them first. If they are already printed, bring them in and we will look at the thickness.
How many pages can you staple together?
It depends on the thickness of the paper. Tell us the page count and the paper and we will say whether a staple will hold the set or whether another binding fits better.
Can you staple in a particular corner?
Yes. Tell us which corner or edge and how many wire stitches.
Start a job
Tell us about your print job.
Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.
(916) 487-8679Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.
- Serving Carmichael since 1965
- Most quotes within one business day
- Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
