Providing personalized printing solutions for over six decades5757 Robertson Ave, Ste B, Carmichael · one block off Fair Oaks Blvd(916) 487-8679
Carmichael Printing Company, Inc.(916) 487-8679

5 min read - updated November 2026

Business card size and layout

The standard US business card is 3.5 by 2 inches, and a file with bleed is set up at 3.75 by 2.25 inches. Keep names and numbers inside a 3.25 by 1.75 inch safe area so a slightly off cut does not clip them.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd
Stack of business cards, front card blank

Key points

  • Finished size: 3.5 x 2 inches
  • File size with bleed: 3.75 x 2.25 inches
  • Safe area for text: 3.25 x 1.75 inches
  • Type: keep contact details readable, about 7 to 9 points
  • Two sides give room for hours, services or a map

A business card has less room than any other printed piece, so every choice shows. Size is settled, but layout takes a little care: what goes on the front, what goes on the back, and how small the type can safely be. Here is how to set it up so it prints cleanly.

Size, bleed and safe area

The size in the United States and Canada is 3.5 by 2 inches, with an aspect ratio of 1.75. The standard in much of Europe is a little different, so a card file made for another country may need resizing. Add 1/8 inch of bleed on every side if a color or photo reaches the edge.

Size, bleed and safe area
ItemSize
Finished card3.5 x 2 in
Artwork with bleed3.75 x 2.25 in
Safe area for text3.25 x 1.75 in

What goes on a card

  • Name and title, largest on the card
  • Business name or logo
  • One main phone number and one email
  • Web address
  • Street address, if customers visit you
  • A one-line description of what you do

Type size and spacing

Contact details are easiest to read at about 7 to 9 points on a card, with clear space between lines. Very thin or very small type can fade on paper, so use a regular weight for the phone number. Reversed type, light letters on a dark background, needs a heavier weight to hold up. See fonts and outlining for how to send type safely.

Using the back

A blank back is also useful, because people write on cards. If you print the back, give it a purpose: hours, a short service list, a map or a reminder space for an appointment. A tint or large solid color on the back reaches the edge, so it needs bleed and a close look at the proof.

Layout mistakes to avoid

  1. Putting text too close to the trim edge
  2. Using a low-resolution logo copied from a website
  3. Cramming in too many phone numbers or social links
  4. Choosing a script font so small it cannot be read
  5. Forgetting to check the proof for digits in the phone number

Checking the proof of a card

Because a card is so small, errors hide in plain sight. Read each digit of the phone number out loud, check the spelling of the name, and compare the proof to your old card or your website. If the card is for an office, send each person their own line to check. Make sure the margins look even when the card is held at arm's length.

Hold the proof at its actual size, not enlarged on a screen. Details that look fine at 300 percent can feel cramped on a 3.5 by 2 inch card.

Rounded corners and special shapes

Square corners are standard. A rounded corner or a custom shape is a die-cut, which is a separate cutting step and needs its own setup and often extra bleed. Tell us early if you want something other than a plain rectangle, so we can plan the file and the finishing together. See die-cutting.

Matching your stationery

A card looks best when it shares a logo, color and typeface with your letterhead and envelopes. If you already have a letterhead, send it along, and we can match the card to it. See the letterhead and envelope set checklist for what to keep consistent across the pieces.

Sources (2)

Questions

Questions we hear

All questions

What size file do I send for a business card?

Set the document at 3.75 x 2.25 inches with bleed, or 3.5 x 2 if the design does not reach the edge, and send a PDF.

Are vertical cards possible?

Yes. A vertical card is the same 2 x 3.5 inch size, turned to portrait, and set up the same way.

Can you design the card?

Yes. Our in-house graphic designer can lay out a card or match an old one.

Start a job

Tell us about your print job.

Send what you know: the piece, the quantity, your file if you have one. Just tell Tony what you need.

(916) 487-8679

Monday to Friday, 9:00 am to 4:30 pm. Or stop by 5757 Robertson Ave, Ste B, one block off Fair Oaks Blvd.

  • Serving Carmichael since 1965
  • Most quotes within one business day
  • Mon-Fri 9:00-4:30, one block off Fair Oaks Blvd

Job jacket · Carmichael Printing

Request a quote

The job
We confirm dates with your quote.

PDF preferred. Also AI, EPS, PSD, INDD, JPG, PNG, TIF, DOC or ZIP. We cannot accept Publisher, Visio, PrintShop or QuarkXPress files, so export those to PDF. Up to 5 files, 20 MB in all, sent exactly as you upload them. No file? Attach a photo of the piece you want reprinted.

You

Phone or email, whichever you prefer. Your details and files go only to Carmichael Printing. Most quotes within one business day; we answer Monday to Friday, 9:00 am to 4:30 pm.